In this area, there are wallpapers made of fabric as well as wallpapers. As the feature that distinguishes fabrics from papers, embossed and designs are made in order to harmonize according to the color of the environment. You cannot find vivid patterns with picture content in these products. The printing technique is used on the papers. The desired patterns of the printing machines can be printed on the machine. It is manufactured by printing with the computer pressing the printing to the machine before entering. However, because this process cannot be done in this way, the fabric printing technique is used. Using the other technique on the fabric and sewing it requires a loaded material. It is also impossible in terms of color matching and achieving the vividness of the colors.
It is much more difficult to apply fabrics to the wall than papers. You can remove the air left in the paper by rubbing it, but you should apply this process with extreme caution on fabric wall coverings. The surface can be abraded and damaged due to rubbing. The glue used in these is heavier than others and contains more adhesive material .
Therefore, you should apply the glue very carefully to the back part of the wall. Make sure that you are at least two people when pulling on the wall. Place it at the head of the most suitable wall corner and glue it. One has to hold it properly to prevent sticking at the bottom.
With the help of a spatula from the top of the area, slowly glue it down with this application. Especially your spatula should not be iron. There are spatulas special for this application. Even if your spatula is one of the sensitive ones, you should apply brute force. If you try to apply brute force, the fabric on the wall You can not use it again while damaging your fabric while causing it to slip and fall down. You have to do the same processes all over again.
Never act fast when applying procedures. Be very careful and never try to apply brute force. Try to place the glue on the wall after making sure that you have applied it properly to all areas. Avoid excessive use of glue if possible. Do not make a very thin application, as this will cause the glue to dry before you place it on the wall. This will enter a second glue application process and cause the surface to appear rough.